Copy Data to Network

If you've received media that contains data you would like to copy to your network, you can do so through Media Manager. Media Manager also provides you the option of processing data from the media you receive into a case already created in OPEN DISCOVERY. To process data into a case, see Process Data Locations.

To copy data to a network location, follow the steps below.

  1. Open Media Manager by selecting it on the OPEN DISCOVERY home page or the main menu.
  2. Select the Media tab, then locate the specific media that contains the data you would like to copy to your network location. If you have not added the media yet, you can do so by following the steps laid out in Create New Media.
  3. Once you've located the correct media, open it by double-clicking on its name, or by selecting the icon.

  4. Click Copy Data to Network.

  5. If you are not already connected to a Copy Station, you will need to connect the media received in your shipment to an available Copy Station. See Manage Copy Stations for more information.

    1. In the Data Status pane, choose a Copy Station. The available drives display to the right.

    2. Click Connect on the selected drive.

    		6.

    Important: If the serial number that is read from the connected drive differs from the data entered in when registering the media, a warning message displays.

  6. Complete Steps a - b (a green checkmark displays next to each step when it is complete.):

    1. Select Paths

      • From the Select Case drop-down list, select the case into which you want to process the data.

      • Select the connected drive to scan.

      • Click Next.

    2. Enter Destination Path

      • Enter the Network Path.

      • Click Process.

 

Related Topics

Process Data Locations

Manage Copy Stations